Configuration: Single module, single fan & heater with a single plenum. Not expandable.

Application: Small to medium sized farms using bins 50,000 bushels or less with adequate bin cooling air. Perfect as a first high speed dryer, the 1100 series delivers between 420 to 1,160 BPH All Heat drying at 5-point removal. While primarily an All Heat corn drying system, the 1100 Series dryer can also be used in Continuous Batch Dry & Cool operation full time or for specific situations – putting a dry cone in a flat bottom wet bin, or occasional soybean or wheat drying – to still be able to deliver cooled grain.

Configuration: Single module, 2 vane axial fans & heaters each with its own plenum in a 67/33 split. Not expandable.

Application: Small to medium sized farms that require flexibility in drying options. The 1200 Series is good for corn and many other grains operating in Dry & Cool mode and good for corn or rice operating in All Heat. Its economical design gives between 400 to 730 BPH Dry & Cool and 680 to 1,160 BPH All Heat at 5-point removal. As with all Vision-equipped, multiple fan GSI dryers, the 1200 Series can be operated in any mode – All Heat, Dry & Cool, Continuous Flow or Batch – for maximum flexibility.

Configuration: Single module, two vane axial fans fans and heaters, each with its own plenum in a 50/50 split. S-Series are upgradable with additional modules, while the H-Series is not.

S-Series Application: Small, medium or large farms with plans to expand drying capacity. As the base for a two or three stack dryer, the 1200S Series is ideal for farmers with definite plans to add a second or third module at a later date. On its own, the 1200S design – similar to the 1200H – is good for those farms that need the maximum capacity on single phase and/or primarily run All Heat or can utilize Staged Auto for Dry & Cool operation.

H-Series Application: The 1200H is primarily Staged Auto or Batch Dry & Cool for corn and many other grains and can operate with corn or rice in All Heat. Economical design that produces between 570 to 700 BPH Dry & Cool and 1,080 to 1,330 BPH All Heat at 5-point removal.

2300 Series Configuration: Two modules, three fans and heaters, one on the upper module and two on the lower module.

2400 Series Configuration: Two modules, four fans and heaters, two on the upper module and two on the lower module.

Application: Medium to large farms who want to increase grain drying capacity without increasing the footprint. Primarily continuous Dry & Cool for corn and many other grains or All Heat for corn or rice. (Note: it takes bins no larger than 50,000 bu. to cool corn dried in the All Heat mode at no more than 1,500 BPH capacity for safe cooling and storage without special management.) Economical design delivers 1,000 to 1,840 BPH Dry & Cool and 1,460 to 2,700 BPH All Heat high speed drying at 5-point removal.

3400 Series Configuration: Three modules, four fans & heaters, one on the upper and middle module and two on the lower module.

3600 Series Configuration: Three modules, six fans & heaters, two each on all three modules.

Application: The maximum grain drying capacity in a Portable Dryer unit for large farm operations. Primarily continuous Dry & Cool for corn and many other grains or All Heat for corn or rice. (Note it takes bins no larger than 50,000 bu. to cool corn dried in the All Heat mode at no more than 1,500 BPH capacity for safe cooling and storage without special management.) Economical design delivers 840 to 2,450 BPH Dry & Cool and 1,000 to 4,000 BPH All Heat high speed drying at 5-point removal.

Configuration: Various. X-Stream is an optional rearrangement of the fans on various dryers (1200H, 1200S, 2300, 2400, 3400, or 3600 Series).

Application: Any size farm that wants to optimize grain drying abilities by drying grain more evenly. Adding the X-Stream Series will even out the heat delivery from front to back of the dryer, improving quality and efficiency. These dryers maintain all the features, benefits and best use criteria of the parent series.